Experimental investigation of time-dependent cavitation in an oscillatory squeeze film

The occurrence of time-dependent cavitation and tensile stress in an oscillatory oil squeeze film were investigated experimentally. The test apparatus was a simple thrust bearing consisting of two parallel circular plates separated by a thin viscous oil film. During the test, one plate was at rest while the other (transparent) oscillated in a direction normal to its surface. This test configuration was chosen to avoid the rotational motion and complicated geometry of a squeeze film journal bearing. The frequency of oscillation was in the range of 5 to 50 Hz and was controlled by an electro-magnetic exciter. The process of cavity formation and its subsequent development was recorded by a high-speed video camera. Concomitant pressure in the oil film was measured both within and without the cavitation region. It was found that both tensile stress and cavities existed in a squeeze film under certain working conditions.     

Optimum Gas Journal Bearing with the Flexible Surface

The optimum shape of the cylindrical internal deformable (flexible) surface of a gas journal bearing of infinite length is designed. The variational problem of determining the clearance shape giving the maximum bearing load capacity is formulated and solved.     

Coupled lubrication and Stokes flow finite elements

A method is developed for performing a local reduction of the governing physics for fluid problems with domains that contain a combination of narrow and non‐narrow regions, and the computational accuracy and performance of the method are measured. In the narrow regions of the domain, where the fluid is assumed to have no inertia and the domain height and curvature are assumed small, lubrication, or Reynolds, theory is used locally to reduce the two‐dimensional Navier–Stokes equations to the one‐dimensional Reynolds equation while retaining a high degree of accuracy in the overall solution. The Reynolds equation is coupled to the governing momentum and mass equations of the non‐narrow region with boundary conditions on the mass and momentum flux. The localized reduction technique, termed ‘stitching,’ is demonstrated on Stokes flow for various geometries of the hydrodynamic journal bearing—a non‐trivial test problem for which a known analytical solution is available. The computational advantage of the coupled Stokes–Reynolds method is illustrated on an industrially applicable fully‐flooded deformable‐roll coating example. The examples in this paper are limited to two‐dimensional Stokes flow, but extension to three‐dimensional and Navier–Stokes flow is possible. Copyright © 2003 John Wiley & Sons, Ltd.     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

On the tribological characteristics of dynamically loaded journal bearing with micropolar fluids

The addition of the additives to the lubricant oil to enhance the characteristics of the lubricant will influence the performance of the bearings. Based on the theory of micropolar fluids, the tribological characteristics of a dynamically-loaded journal bearing are numerically studied. Comparisons are made between the Newtonian fluids and the micropolar fluids. It is shown that for a dynamically-loaded journal bearing, the micropolar fluids yield an increase not only in the friction force, but also in the friction coefficient. In addition, the oil film pressure and the oil film thickness are obviously higher than that of Newtonian fluids.     

“双一流”高校学生国际期刊论文写作需求分析*——对化学专业的调查

以某“双一流”高校化学专业学生为研究对象,通过问卷调查和访谈,调查他们在国际学术期刊论文写作方面的需求。研究发现学生需求程度较高的是团队教学,青睐英语写作教师与化学专业教师有配合的教学,并希望对写作及时反馈,同时需要编辑、图书馆员等协助提高学术素养。值得注意的是,学生对个性化、一对一辅导的需求程度最高。该研究结果对高校,尤其是“双一流”高校国际期刊英语论文写作课程的设置和教学具有参考价值。     

基于功率谱包络能量和SVM的舰用发动机故障诊断

发动机是军舰上的重要部件之一,其稳定性对军舰的正常航行具有重要影响。以舰用发动机关键部件(主泵轴承)为具体研究对象,提出了基于功率谱包络能量和支持向量机相结合的故障诊断方法。首先获取了大量可表征舰用发动机主泵轴承健康状态的振动加速度信息,对其进行功率谱分析,获得其功率谱的包络能量;以获取的舰用发动机主泵轴承功率谱的包络能量构建特征向量,并设计基于SVM的舰用发动机主泵轴承故障诊断模型,对主泵轴承的故障进行诊断研究。研究结果表明,采用基于功率谱包络能量和SVM相结合的舰用发动机关键部件故障诊断方法,可以很好实现主泵轴承的故障诊断效能,为舰用发动机主泵轴承故障诊断的工程应用奠定了基础。     

Regulated Single‐Axis Rotations of a Carbonaceous Guest in a van der Waals Complex with an Entropy Cost

In a tight host–guest complex assembled solely by nondirectional van der Waals forces, unique motions of the guest, such as solid‐state inertial rotations, emerge. The regulation of dynamic motions is an important element to be explored for novel functions of such complexes, which may be seemingly difficult to achieve because of the nondirectionality of the assembling forces. A regulated, single‐axis rotation was made possible by choosing an appropriate shape of the guest in the tubular host. Specifically, an ellipsoidal guest was made to stand along a cylinder axis of the host, which consequently resulted in single‐axis rotations of the guest in the solid. The rotational frequency was considerably high for solid‐state rotations but was suppressed to 10 GHz, which was 1/20 of the isotropic rotation of a spherical guest. In‐depth kinetic analyses quantitatively revealed that the entropy cost was a determining factor that regulated the dynamics.     

Experimental Study of the Influence of Changes in Load Direction on the Performance of a Crown Bearing

Laboratory tests have been carried out in order to investigate the influence of small changes in load direction on the performance of a steadily loaded hydrodynamic crown journal bearing. Hydrodynamic pressures, temperature distribution on the bush internal surface, shaft temperature, oil flow rate and bush torque were measured for fixed sets of operating conditions, at three different groove locations () with respect to the line of load ( = 0, –30, and +30 degrees). For each groove location quantitative information is provided concerning to the influence of applied load and shaft rotational speed on the performance characteristics. Changing the location of the groove around the load line did affect flow rate, bush torque and maximum hydrodynamic pressure, but only had a slight effect on bush maximum temperature.     

飞轮储能器的新型高温超导悬浮轴承研究

储能器是一种储存能量的装置,随着高温超导悬浮轴承运用到飞轮储能器中,储能效率得到了大大的提高。它的主要结构是由高温超导体和永磁体组成。文中提出一种全新高温超导悬浮轴承,并研究其的力学性能,为新型超导悬浮轴承的研究与开发做好了基础准备。